PCS-5025
ALUMINUM INTERIOR-EXTERIOR
DESCRIPTION: A ready mixed leafing aluminum finish made with a polyurethane modified linseed oil resin. It has exceptional adhesion, flexibility, brilliance, exterior durability and hiding power; will not crack or peel due to wide temperature fluctuations.
USES: For use on bridges, water towers, metal roofs, storage tanks, farm and industrial buildings and machinery, wooden structures of all types. PCS-5025 is an excellent primer on wood under oil based finish coats.
SURFACE PREPARATION: Surfaces to be painted must be clean, dry and free of oil and/or grease. Previously painted surfaces: remove all loosely bonded paint with scraper and wire brush. Tightly bonded existing paint need not be removed. For best results, rusty surfaces should be cleaned and primed with an inhibitive primer.
MIXING: PCS-5025 is ready to use; no thinning is necessary. Stir thoroughly before using.
APPLICATION: Roll, brush or spray. For roll and brush, use as received. For spray: up to 1 pint of REDUCER #75 per gallon. Apply at a rate of about 500 square feet per gallon.
CAUTIONS: Flammable This product contains solvents. Keep away from heat and open flame. Keep containers closed. Use with adequate ventilation. Avoid prolonged breathing of vapor. Avoid prolonged or repeated contact with skin. If used in confined areas, observe the following precautions to prevent hazards of fire, or explosions, or damage to health: (1) circulate adequate fresh air continuously during application and drying; (2) use fresh air masks and explosion-proof equipment; (3) prohibit all flames, sparks, welding, and smoking.
If swallowed, do not induce vomiting. Call a physician immediately. For eye contact, flush with plenty of water. In case of skin contact, wash thoroughly with soap and water.
See material safety data sheets for full precautions prior to use.